Lehle Switching

Lehle is the ultimate solution for perfect signal routing!

• Absolutely loss-free
• No clicking noise on shifting
• Long-lived due to robust built
• Easy use
• Only highest quality parts
• Made in Germany

www.lehle.com

You can find all Lehle products in our Onlinehsop.

What's the difference?

The buttons

What catches the eye when looking at all Lehle-Switchers are the large mushroom buttons. The musician presses this button with his foot – this activates a momentary switch located inside the switcher via a metal lever. Since button and momentary switch aren’t mechanically connected, only the button takes the strength of the foot’s pressure. There’s no pressure on the circuit board. With maximal construction robustness, the manipulation of the button is very low-friction with its setting in a special socket.

Switching with the highest level of signal loyalty

The signal sent from the jack of a guitar or bass is so weak that bad leads, cold soldered connection points or cheap contact materials audibly impair the sound. In order to switch these weak signals without any loss of sound or sound corruption it requires special materials, of which the contacts of these switchers are made.
With all Lehle-Switchers, the signal is routed via special gold-plated relays.
This guarantees absolute clear and reliable switching of sensitive signals.

Lehle-switchers switch in a passive mode

Basically, Lehle-Switchers route the signal passively without semiconductors in the signal path. The sound of a guitar or bass is mainly created by an interaction of the weak signal of the instrument and a very sensitive amp input.
If the signal was enhanced by an active buffer amp, the playing experience and sound would be changed considerably. However, at the same time, the signal becomes less sensitive. This means that, behind a buffer amp, cheapest components could be used, which would really influence the sound in a passive mode. Buffer amp and other active components can thus be useful, but if they can’t be switched off there is no place for them in the signal path of a switcher for purists!

What’s the meaning of “True Bypass”?

The musician doesn’t want to alter the unique sound developed by the interaction of instrument and amp for as long as effects remain unused.
Therefore, nearly all “better” effect units are equipped with a “True Bypass” footswitch.
However, normal footswitches contain contact materials originally developed for the routing of large currents (e.g. manufacturing machinery), as this is their main operational area. This becomes audible when after a certain time of use the resonating tone of a guitar suddenly cuts off. Compared to the direct path of lead to instrument to amp, the sound of an instrument routed via a chain of switched off “True Bypass” effects is quite dead.
Lehle-Switchers are, because of the use of gold-plated relays, specially developed for the switching from very weak signals, real “True Bypass” switchers.

Made in Germany

All Lehle products use only branded components. Cover, bottom and circuit board are firmly bolted with each other using rustproof threaded inserts. The double-sided printed circuit board, made of fibreglass reinforced epoxy resin has plated-through holes. This guarantees greatest mechanical durability and the best possible electrical connection of all components.
All individual components like the housing, circuit board or the buttons -including spring and socket – are manufactured, assembled and tested in Germany.